Bug #254

Add support for enabling jumbo frames to the network config screens

Added by tjc about 15 years ago. Updated over 12 years ago.

Status:Closed Start date:
Priority:Normal Due date:12/31/1969
Assignee:- % Done:

0%
Category:- Spent time: -
Target version:6.00.04

Description

This should be pretty straight forward, mostly a check box and an MTU value to be added to /etc/net/ifaces/eth0/iplink or other appropriate file for the interface. See ticket #251 for more.

In the R5 series this was always one of those nuisance chores that had to be done manually after each install.

Related issues

related to LinHES - Bug #251: jumbo frame support in R6 Closed

History

Updated by graysky about 15 years ago

An entry in the service menu would be very slick.

Updated by jams about 15 years ago

Implemented in LinHES-config 1.0 343.

Please note that not all MTU's will be supported by the card.
If they are not supported they will silently be ignored when starting the network.

Updated by jams over 12 years ago

  • Target version changed from 7.2 to 6.00.04

Also available in: Atom PDF